|
Used Equipment | Listed April 19, 2013
1.5-2" Standing Seam Rollformer on 12k trailer; includes single or double lock power seamer and roll out stands. Call Ricky at 903-272-2192. ... More Info ...
|
|
|
Used Equipment | Listed April 16, 2013
Hardly Used KWM IRONMAN 6" K Style Seamless Gutter Machine
Willing to sep. sell machine only but not the trailer only: willing to negotiate
7 stations
front pull guillotine
emergency shut off
easy adjust entry guides
two quick release run-out stands
2 turnstyle spools for coil runo ... More Info ...
|
|
|
Used Equipment | Listed December 28, 2012
Ag Panel "Tooling only" in good condition, 16 passes, for 3.5" ID shafts, good chrome, with Airam cut off shears leon@abmartin.net 717 445-6885 ... More Info ...
|
|
|
|
Used Equipment | SOLD
21' Folder, prefer with slitter leon@abmartin.net 717 445-6885
|
|
|
|
Used Equipment | Listed December 27, 2012
Machine has about 60hrs on it. It comes with two sets of dies, SS450SL and FF150. Has gas hydralics, 2 expandable arbors, bead rollers, 50 feet run out tables, all mounted on a 12k trailer with 4 crane hooks. Call if u have any questions
Willie 325-660-5035 ... More Info ...
|
|
|
|
Used Equipment | Listed December 27, 2012
Machine has about 60hrs on it. It comes with two sets of dies, SS450SL and FF150. Has gas hydralics, 2 expandable arbors, bead rollers, 50 feet run out tables, all mounted on a 12k trailer with 4 crane hooks. Call if u have any questions $62500 obo
Willie 325-660-5035 ... More Info ...
|
|
|
Used Equipment | Listed November 12, 2012
We Have A Slightly Used 09 New Tech Machinery Model SSQ Multipro Comercial Roof Pannel Machine. It Is In Excellent Shape with very Little Use. Less than 75hrs. Mounted on a Tandem Axle Trailer. EXCELLENT MAINTAINED CONDITION; includes Computer batch controller, machine Cover; Run Out Table; Dual Ove ... More Info ...
|
|
|
|
Used Equipment | Listed October 31, 2012
Newtech Multipro, 2 profiles FF100 and SS150, clip relief and stiffening rollers. Machine on stand, 80 ft of run-out stand. 100ft cord, lenght cutout switch, cover ... More Info ...
|
|
|
Used Equipment | Listed October 29, 2012
Used mid 80's model ASC 20k decoiler with coil cart. Was part of working R panel line. 18-24" expansion.
$18k obo
870-314-2112 or email stuff4purchase@gmail.com ... More Info ...
|
|
|
Used Equipment | Listed October 22, 2012
Complete 16pass SJP R.F. Line running Corrugated Panel up to 3ft. wide.
10Klb. Power Uncoiler, 35ton AirPress
Flying Shear. AMS Controller. New 2000.
**BONUS: Flush Wall Tooling **
Priced to Sell $59500.00 On Truck
Call 561-215-8001 ... More Info ...
|
|
|
Used Equipment | Listed October 8, 2012
21' Double Folder MFG:Variobend
CNC Slitter
Taper Gauging
Brush Table
Light Curtain
Year model 2010
21’ x 16 gauge capacity
6 month warranty
$3000.00 additional for Install and training
Contact: Melinda Detailed Metals
p-(770)412-8181 or mprince@detailedmetals.com ... More Info ...
|
|
|
|
New Tech SS 450 dies for SSP Rollformer |
6500 obo
|
Used Equipment | SOLD
set of ss450 dies for new tech ssp roof panel machine. Dies are in good condition, asking 6500
Contact Sean, 1250 883 3051
|
|
|
Used Equipment | Listed September 28, 2012
The Machine line is composed of decoiler, formaing machine, hydraulic forming machine, device, hydraulic pump and electrical control.
Forming Profile: the profile width is 720mm, Rib height 40mm, able to produce 0.35mm -0.42mm (BMT).
Production Flow: Coiler - Roller forming - Cutting - Produ ... More Info ...
|
|
|
|
Used Equipment | SOLD
Looking for a ese standing seam 1\" high seams 715-281-6606 or aschoenecker2005@yahoo.com
|
|
|
Used Equipment | Listed August 23, 2012
Offering machine with SL175 tooling cartridges, (2). I have alternate set of tooling cartridges,(3) that produce MS100 & MS150, SL100 & SL150, and NS100 & NS150. Listed price is for either of the tool sets. I can be reached at 214-502-5610 or mitchg.martin@yahoo.com. Thanks Mitch ... More Info ...
|
|
|
Used Equipment | Listed August 10, 2012
ESE Roof Panel Machine: Makes a 1" standing seam roof panel perfect for the economic roof system because it only looses 3" in the seams
24" coil = 21" panel coverage 14% loss of material
20" coil = 17" panel coverage 17.6% loss of material
16" coil = 13" panel coverage 23% loss of material
A ... More Info ...
|
|
|
Schechtl Shear/Folder |
40000
|
Used Equipment | SOLD
One (1) Refurbished (1999) Schechtl Max 3100 Folder w/AMS
Pathfinder Controller One (1) 2008 Schechtl SMT 310 Shear
10ft x 16ga
|
|
|
Used Equipment | Listed August 1, 2012
Schlebach Quadro PLUS Roll Forming Machine
A+ Cassettes 1.5” & 1.0“ “Snap Lock/Mechanical Lock/Nail Strip”
Concave curving Attachment
Striation Attachment
Longitudinal Slitter
Decoiler, Forklift Coil Handling Adapter
Picolo Mechanical Lock Electric Seamer
Clips, and misc materials.
... More Info ...
|
|
|
Used Equipment | SOLD
Hydralic Expand Power forward and Reverse Eye for loop control
|
|
|
SCHECHTL 10'x16ga CNC folder Age 1999 |
$24,500
|
Used Equipment | SOLD
Model MA 310/CNC, 121" long x 1.5MM(.059 thick) under power for inspection. Sunbelt Machinery 770-516-0499 or info@sunbeltmachinery.com
|
|
|
Used Equipment | Listed July 24, 2012
15 stands, 3" shafts, rotary encoder/PLC control, taken from service 1st week July 2012. Age 1995. Sunbelt Machinery 770-516-0499 or info@sunbeltmachinery.com ... More Info ...
|
|
|
Used Equipment | Listed July 23, 2012
Forstner Coil Processing line. 12,000# 48" capacity. Slit and cut to length or Recoil. Five sets of slit blades.
Excellent condition.
Approximately 10 years old.
Contact John- 303-287-8400 or emailjohn@southwesternmetal.com for info ... More Info ...
|
|
|
Used Equipment | Listed July 19, 2012
Schlebach Quadro Basic Shell
Schlebach Quadro A+ Roll Forming Machine
RBM 25.38 Panel Curving machine
A+ Cassettes 1.5” & 1.0“ “Snap Lock/Mechanical Lock/Nail Strip”
Longitudinal Slitter
Concave curving Attachment “Questionable”:
Striation Attachment
ESE 2000 # Decoiler
2 ... More Info ...
|
|
|
|
Used Equipment | Listed July 19, 2012
Metal Roofing Equipment
To fabricate Standing Seam Metal roofing for flat panels and Curved/Radius panels
Curved Panels are a specialty!
Bought new 2008 used very little
Equipment list and photos as follows:
Schlebach Quadro Basic Shell
Schlebach Quadro A+ Roll Forming Machine
A+ ... More Info ...
|
|
|
Used Equipment | Listed July 19, 2012
Metal Roofing Equipment
To fabricate Standing Seam Metal roofing for flat panels and Curved/Radius panels
Curved Panels are a specialty!
Bought new 2008 used very little
Equipment list and photos as follows:
Schlebach Quadro Basic Shell
Schlebach Quadro A+ Roll Forming Machine
A+ ... More Info ...
|
|
|
MET FORM R Panel Rollfomer |
$145,000
|
Used Equipment | SOLD
14 Stands x 3.5" shafts, geared machine
excellant condition, Model MCD 1380, Age 1995, 30 HP AC, New inverter drive 2005, Sunbelt Machinery 770-516-0499 or info@sunbeltmachinery.com
|
|
|
MASTERFORM AG panel Line Age 2005 |
$18,000
|
Used Equipment | SOLD
14 Stands,5,000 Lbs uncoiler, manual shear, PLC Batch count, rotary encoder
measuring, 2 HP single phase, Sunbelt Machinery 770-516-0499
or info@sunbeltmcahinery.com
|
|
|
MRS Ridge Cap Rollfomer AGE 2008 |
$34,000
|
Used Equipment | SOLD
11 Stands, Tooled for Ridge Cap,up to 13.5" wide material, grade 80,Age 2008, Little use like new. Sunbelt Machinery, 770-516-0499 or info@sunbeltmachinery.com
|
|
|
|
Used Equipment | Listed July 5, 2012
Knudson KR20 Roof Panel Machine Rolls a 1-3/4 in tall 10 to 24in wide Panel Machine used for in shop frabrication On a 2-axle Trailer 50ft on runout tables ... More Info ...
|
|
|
Used Equipment | Listed July 5, 2012
PRICED REDUCED NEED TO SELL FAST WE PURCHASED THIS MACHINE 5 OR 6 YEARS AGO TO FABRICATE BILLBOARD FACES. THIS MACHINE WOULD BE GREAT FOR OTHER APPLICATIONS SUCH AS ROOFING PANELS. WE ONLY RAN 700 TO 800 PANELS, SO ITS IN LIKE NEW CONDITION. For more info please contact Michael Trotter @864-99 ... More Info ...
|
|
|
Used Equipment | Listed July 5, 2012
Like new Master Metal USA rollform machine for sale. Rolled less than 200 feet. I have two machines and only have work for one. Roll 26 or 29 guage ag panel. Eric @ 864-844-2095 or ej1977@earthlink.net ... More Info ...
|
|
|
|
Used Equipment | SOLD
Newtech SSP with computer and two profiles, mounted on a factory trailer with two decoiler spools. Call Steve at 717-421-6000 or 717-234-0555
|
|
|
|
Complete Roof Metal operation |
$175,000.00
|
Used Equipment | SOLD
MRS Double Deck (R and Ag Panel) Roll Former with 60' Stacker. Like new 10' x 16 Gage Roper Whitney CNC Folder and Shear. Call Ron @ 559-685-0415 x209, or cell 559-730-1557.
|
|
|
|
Used Equipment | SOLD
NewTech SSP with two roller sets mounted on factory trailer, complete with computer and two decoiler rolls. Call 717-234-0555 for more info!
|
|
|
|
Brake/Shear For Sale |
40000
|
Used Equipment | SOLD
One (1) Refurbished Schechtl Max 3100 Folder w/AMS
Pathfinder Controller One (1) New Schechtl SMT 310 Shear with Material Wagon
FOB NC
|
|
|
Used Equipment | Listed May 22, 2012
2003 Marian MFG Cut to Length Sliter. 9 Sets of Blades, with uncoiler. Canton SD call Leonard Jr $28,000 OBO 605-987-9080 ... More Info ...
|
|
|
Used Equipment | Listed May 22, 2012
2003 Marian MFG Ag Panel Roll-former Post Cut shear Complete Set Up with stacker, 10k uncoiler, Call Leonard Jr For More Info 605-987-9080 ... More Info ...
|
|
|
Used Equipment | Listed May 21, 2012
EXCELLENT SHAPE AND PERFECT WORKING CONDITION!! ESE ROLL FORMER ON TRAILER with SHEAR, STIFFENING RIBS, LENGTH-STOP CONTROL, LIFTING EYES, DECOILER with LIFTING CHAIN & (1)1" FIXED CLEAT BENDING TOOL ... More Info ...
|
|
|
|
NTM SSQ Multipro Roof Pannel Machine |
49,000.00
|
Used Equipment | SOLD
We Have A Slightly Used 09 New Tech Machinery Model SSQ Multipro Comercial Roof Pannel Machine. It Is In Excellent Shape Its Had Verry Little Use. Trailer Mounted Also
|
|
|
12/16SL Jobsite Snaplock Roll Former |
12,500
|
Used Equipment | SOLD
Used 12"/16" Snaplock (nail fin) Jobsite rollformer, Manual shear, length limit control switch. Add $1500 for trailer with panel machine purchase - contact parker 801-265-9929
|
|
|
Roll Former VS 150 |
17,500
|
Used Equipment | SOLD
Extremely low hour unit electronic batch controller unit that has been meticulously cared for.
Built in early 2007.
See pictures for condition
I also have two heavy duty decoilers and a trailer that can go as a package deal.
Start you metal roofing business today!
Save big over new.
|
|
|
|
2006 SCHECHTL SHEAR AND MATERIAL WAGON |
15,000
|
Used Equipment | SOLD
2006 SCHECHTL SHEAR AND MATERIAL WAGON SN# 130606 BOUGHT BRAND NEW IN 2006 SMALL METAL ROOFING COMPANY USED LIGHTLY PAST 6 YEARS- COMES WITH COMPRESSOR RECENTLY HAD APPRAISED PRICE IS BELOW
|
|
|
|
2006 SCHECHTL MAX 3100 FOLDER |
35,000
|
Used Equipment | SOLD
WE HAVE A 2006 SCHECHTL MAX 3100 FOLDER FOR SALE $35,000 SERIAL # SN#111006- BOUGHT BRAND NEW IN 2006 WE USED LIGHTLY OVER THE PAST 6 YEARS- SMALL METAL ROOFING COMPANY -RECENTLY HAD APPRAISED AND PRICE IS BELOW- 651-329-6539 KATHRYNWEYANDT@YAHOO.COM LOCATED IN MN
|
|
|
|
Used Equipment | SOLD
Used manual Van Mark hand brake 10'6" with an optional slitter. Asking $2,200. Photos upon request. Call Greg 814-516-2964.
|
|
|
|
Used Equipment | SOLD
Chicago Hand Brake 12' with optional hand back gauge. Paid $8,385 for new in 2011. Used for 1 month. Asking $7,200. Photos upon request. Call Greg 814-516-2964
|
|
|
2008 New Tech SSP |
$38,000.00
|
Used Equipment | SOLD
Only 26 hours on this fully loaded roll former! Gas over hydraulic. Comes on a 12K trailer from the factory, two overhead decoilers, 5-10' run out tables, computer controlled batch system, SS450 Snap lock panel in machine now. Quick change system for other profiles if needed. Also comes with an I
|
|
|
MRS 10,000 Lbs Coil Tipper |
$5500
|
Used Equipment | SOLD
10,000 Lbs Capacity, Manual reset to coileye to sky position, Hydraulic actuated with gravity feed to coil eye to horizontal position. Little use
770-516-0499/info@sunbeltmachinery.com
|
|
|
MICO 20,000 Coil Tipper , Pac Man Type, |
$11,950
|
Used Equipment | SOLD
60" x 60" Bed, Gearmotor and chain actuated
Phone 770-516-0499 or info@sunbeltmachinery.com
|
|
|
ADS 20,000 Lbs Coil Car, mas type, self contaained hydraulic unit, |
$7450.00
|
Used Equipment | SOLD
Ready to work, manual controls,
hydraulic traverse and lift. Located GA
phone 770-516-0499 or info@sunbeltmachinery.com
|
|
|
2010 JORNS 21' Folding Brake 16 gauge NICE |
$109,000
|
Used Equipment | SOLD
2010 JORNS 21' Folding Brake 16 gauge, this machine is like new. super speed hydraulic pump, recest slitter, auto radius adjustment. Very Nice Machine
Call Leonard 605-987-9080
Also Marion AG Panel Roll former for sale and Marion Slitter, call for info
|
|
|
|
Used Equipment | Listed March 25, 2012
1.5" snaplock profile,1.5 mechanical lock profile and 1" mechanical lock profile. Contact Mark @ (817) 845-8900 ... More Info ...
|
|
|
New Tech SSP Multi Pro |
34,000.00
|
Used Equipment | SOLD
1 3/4" Snap loc panel with the computer and ready to roll. Garage kept.50' of roll stands. 2 coilers, some tools and some coils go with. All on a 12,000 lb. trailer.
|
|
|
|
Used Equipment | Listed March 18, 2012
I have a set of FF100 tooling that goes in a New Tech SSR machine. I have only run around 200 +- sq through this tooling.
The FF100 profile is a 1" fastener flange or nailstrip profile.
Price is $6000.00
Please email me at wakeboarder175@austin.rr.com ... More Info ...
|
|
|
|
10' CP Tools Box and Pan Break |
$11,000
|
Used Equipment | SOLD
CP Tools 10' Box and Pan Break.
Model#: V-1014-6
Manf. Date: June 2002
We have a 10' Box and Pan Break made by CP Tools. All tools for adjustments included.
Features:
14 Gauge Capacity
120" Bending Capacity
6" finger depth
0-135 degree bend angle
26 removable fingers (6-3",4-4
|
|
|
|
Used Equipment | Listed March 16, 2012
Selling 2008 Metal Man Multi-Panel Roofing Machine” manufactured by Englert. Includes two coil rollers and is mounted on trailer and ready for use. Pictures available upon request
This machine fabricates two standing seam profiles:
– 1 ½” snap lock with clips – used residential and co ... More Info ...
|
|
|
|
12/16 Jobsite Snaplock Roller Former |
9,500.00
|
Used Equipment | SOLD
Used 12"/16" Jobsite Roll Rollformer with 50' of stands, and 1 decoiler to attache to trailer. Manual Shear, works great. Northern Colorado (Trailer Excluded)
|
|
|
|
Used Equipment | SOLD
2007 NEW TECH MACHINERY; 40 HOURS,GARAGE KEPT; DRC01 COMPUTER ASS’Y AM5450; TR-12 TANDEM AXLE TRAILER
OVERHEAD REEL RACK; QTY 2- DR01 EXPANDABLE DECOILER REELS; QTY 5 ROS10 RUN OUT STANDS 10’ SECT; COVER KIT. E/M FOR PICS
GERI 772-344-3717, OR E/M roofconceptsinc@bellsouth.net
|
|
|
|
5-V CRIMP METAL MACHINE |
30,000
|
Used Equipment | SOLD
NEW TECH MACHINERY;PURCHASED 2007; 40 HOURS,GARAGE KEPT; DRC01 COMPUTER ASS’Y AM5450; TR-12 TANDEM AXLE TRAILER; OVERHEAD REEL RACK
QTY 2- DR01 EXPANDABLE DECOILER REELS
QTY 5 ROS10 RUN OUT STANDS 10’ SECT
COVER KIT; GERI 772-344-3717; OR EM roofconceptsinc@bellsouth.net
|
|
|
|
Standing Seam Metal Roof Machine PLUS Slitter, 10′ Shop Brake and Seamer |
22,000
|
Used Equipment | SOLD
Here’s the whole package! Start your Standing Seam Metal Roof Business TODAY!
ONLY $22,000!
- ESE Standing Seam Roll Forming Machine (1 1/2″ stand, 20″ wide panels formed from 24″ rolls) ON TRAILER!
– Electric Seaming Machine
– 10′ Tennsmith Model (HB121 18) Shop Brake
– Gary S
|
|
|
|
2007 SSR New Tech Metal Roll Former Machine |
$15,000.00
|
Used Equipment | SOLD
For Sale a used 2007 SSR New Tech Metal Roll Former Machine with 30' of run-out stands. It has 1 1/2" leg profile now, may have to offer another panel profile. Located in Ohio. Call Derek at 937-968-5937.
|
|
|
|
2007 SSR New Tech Metal Roll Former Machine |
$15,000.00
|
Used Equipment | SOLD
For Sale a used 2007 SSR New Tech Metal Roll Former Machine with 30' of run-out stands. It has 1 1/2" leg profile now, may have to offer another panel profile. Located in Ohio. Call Derek at 937-968-5937.
|
|
|
Roof Panel Machine for Sale |
40000
|
Used Equipment | SOLD
2000 Zimmerman Commercial Panel Machine
Equipped with:
SL-1750 and SS-2000 Profile Tools
Digital Batch Controller
Run Out Stands
Hot Melt Technologies Model G-4 Sealant System
It's not under power, but inspections are welcome
Location: FT Worth, TX
|
|
|
|
New Tech Machinery SSQ & Tandem Trailer FOR SALE; 75 Hrs |
$39,900
|
Used Equipment | SOLD
Used 2009 New Tech Machinery SSQ & Tandem Axle Trailer FOR SALE:; The SSQ has 75 Hrs and the NTM SSQ Factory Warranty is good till end of March 2012 and Transferable; EXCELLENT MAINTAINED CONDITION; Computer & Cover; Run Out Table; Dual Overhead Reel Rack & Expandable Arbors; Panel Profile: SSQ675 (
|
|
|
Artos 39" x 10,000 Lbs uncoiler |
$9500
|
Used Equipment | SOLD
39" Face, 10,000 Lbs capacity, Hydraulic expand, loop control, self contained hyd
unit, 18"-21" Hydraulic expand
770-516-0499 info@sunbeltmachinery.com
|
|
|
Bradbury 16 Std AG panel Rf line, 20K unc, AMS control |
$59,500
|
Used Equipment | SOLD
20K uncoiler, 16 Stand geared machine,
tooled for AG panel, Airam post cut off,
AMS XL 100 control 1980 $59,500 OBO
770-516-0499 or info@sunbeltmachinery.com
|
|
|
10' Tennsmith Hand Brake |
4000
|
Used Equipment | SOLD
Tennsmith HB-121 In Brand New Condition.
Still on the factory pallet.
Very Little use.
Call John at 303-287-8400 or email john@southwesternmetal.com for information and pictures.
|
|
|
Jobsite 7" Gutter Machine |
24000
|
Used Equipment | SOLD
Jobsite IG-7' Box Gutter Machine.
Excellent condition.
Call John at 303-287-8400 or email john@southwesternmetal.com for information and pictures.
|
|
|
|
Used Equipment | SOLD
Forstner Coil Processing line. 12,000# 48" capacity. Slit and cut to length or Recoil. Five sets of slit blades.
Excellent condition.
Approximately 10 years old.
Contact John- 303-287-8400 or email
john@southwesternmetal.com for info
|
|
|
2010 ENGLERT METALMAN MULTI PANEL ROOFING MACHINE |
$52,000.00
|
Used Equipment | SOLD
BOUGHT BRAND NEW IN 2010. LOW HOURS. MACHINE LOCATED IN PITTSGROVE, NJ. EXCELLENT CONDITION. KEPT IN WAREHOUSE. SITS ON A 6 TON TANDEM TRAILER. COMES WITH 3 DIES, A1101 (1" SNAPLOCK WITH NAILFIN), A1500 (1 1/2" SNAPLOCK), A1300 (1 1/2" MECH. SEAMED). IS CAPABLE OF FORMING 11 DIFFERENT PROFILES.
|
|
|
|
For Sale 1 Roll Former SSX Seamer &10' Tennsmith Manuel Hand Brake |
$4,000.00 for both or $2,500.00 for seamer
|
Used Equipment | SOLD
SSX Seamer great condition used on 5 jobs,seams 1"& 1 1/2" doulbe locked panels & Tennsmith Brake is in good working condtion, garage kept.Call 540-623-4200 for information
|
|
|
Used Equipment | Listed November 21, 2011
This machine is like new, it has only one job ran through it and has never been outside the warehouse. I can be reached at 228-617-4082 or email puzzaz01@hotmail.com Thanks Darrin ... More Info ...
|
|
|
Used Schechtl Folder & Shear Combo |
$10,000
|
Used Equipment | SOLD
I have the following for sale.
1)1999 Schechtl Folder $25,000
2)2003 Tennsmith 10\' Shear $13,000
3)2007 Schechtl Folder $33,000
4)2007 Schechtl Shear $14,000
All machines are in good working condition and are under power. Please email me for more info metalroof02@aol.com
|
|
|
|
Power Decoiler Wanted |
asking price
|
Used Equipment | SOLD
I need a power decoiler that decoils at approx 180\' per min. mandrel or arm length needs to be 48\" core size of 24\".
419-657-2510
|
|
|
Ag Panel Roll Former |
$34,000
|
Used Equipment | SOLD
Fully functioning roll former. Mastercraft roll former. A small machine runs approx. 30' per min. Great start up machine. Comes with trim cut off table, manuel decoiler. 419-657-2510. email = marvin@barnsunlimitedltd.com
|
|
|
METAL CORRUGATED PANEL LINE ( FULLY AUTOMATIC) |
$51,900
|
Used Equipment | SOLD
Corrugated Metal Panel Line
Profile : 1/2" x 2.67" corrugation.
Niagara Powered / Expandable Uncoiler with coil eye to control slack.
Machine No. : RL5 - 36
Capacity : 6000 x 36
Serial No. : E - 1723
Roper Whitney Pexto Shear
Model : PH - 452
Serial No. : 664 3/99
Capacity : 16 ga. so
|
|
|
|
5V Metal Roofing Machine - Rollformer |
20000
|
Used Equipment | SOLD
2005 5V Metal Roofing Machine comes with 5000 pound decoiler and a Digital controller (for length control with single batch)
2" x 3" Industrial downspout machine - $15,000
|
|
|
MATTHEWS 20,000 Lbs Coil tippers(2 available) |
$14,500 EACH
|
Used Equipment | SOLD
Hydraulic actuated, L shaped design, powered conveyor on flat side and saddle side. self contained. 72" wide pallet capacity. HEAVY CONSTRUCTION sales@sunbelt machinery.com
770-516-0499
|
|
|
|
Zimmerman Standing Seam Roll Former |
23,950.00
|
Used Equipment | SOLD
2006 Zimmerman Standing Seam Roll Former. 1" snap lock using clip. Set up in house. Not with trailer. Will include base. Decoiler. 3 phase power.
|
|
|
Englert MetalMan Multi-Panel Roofing Machine and 10 Ton Trailer |
25,000
|
Used Equipment | SOLD
MetalMan Multi-Panel Roofing Machine and Commercial Tandem 10 Ton Trailer.
Machine and trailer are located in SE KY. About 4 years old. 25K OBO. In excellent condition. Kept in warehouse. Email serious inquires only to Lucinda: at lehlen@yahoo.com or call my cell at 847-757-2565.
|
|
|
Jorns 21'x18GA Folding machine Age 2000 |
$37,500
|
Used Equipment | SOLD
Model 125 SO-CNC 400A -6-4HS
480/3/60
Can demo under power, loaded on truck at no cost
Phone 770-516-0499
sales@sunbeltmachinery.com
|
|
|
Used Equipment | SOLD
One Roll Former Corp VS 150, SSX Seamer, Schlebach Panel Curving Machine, Schlebach Piccolo power roof seamer mounted on double axel trailer. various hand tools. 1999 & 2000.Very Good Condition. Bill Hill 770/329-2811
|
|
|
|
Complete Roof Metal production operation |
Reduced $200K
|
Used Equipment | SOLD
Double Deck MRS Roll Former, Sheet Stacker, 10' Shear and Break, Heavy Duty Shelving/Racks contact Ron @ 559-685-0415, or 559-730-1557
|
|
|
|
New Tech SSR Multi Pro Jr. Pan Machine |
10,000.00 OBO
|
Used Equipment | SOLD
New Tech Machinery SSR Multi Pro Jr.Pan Machine has FF100 tooling installed in machine, great condition and low hours. Runs 16" to 20" coils
|
|
|
2008 Englert Multi Panel Machine-Standing Seam |
$51,000
|
Used Equipment | SOLD
-Profiles included are:
-A1000-Sanp Lock
-S2500 Mecanically Seamed Profile
-Machine is capable of forming 11 different profiles
-Very good condition & well maintained
-Serviced by Englert in Denver
-Contact Jared or Sonny 303.734.0956
-Located in Denver CO-Contact to discuss
|
|
|
|
For Sale 5 V Rollformer |
14000.00
|
Used Equipment | SOLD
5V rollformer corp machine
priced to sell
decoiler, batch controller, and auto shear. also new accucoder
|
|
|
Metal Roofing Panel machine on trailer |
16000.
|
Used Equipment | SOLD
1. Makes 16 " standing seam metal panels
2. Mechanically seamed for low pitch roofs
3. Uses 20 inch coils 22,24,26,28guage metal
A-13 Roll forming machine, 110V electric, mounted on trailer .
included is an elec mechanical seamer for straight or curved panels
|
|
|
|
Schechtl Brake and Shear |
BARGAIN !
|
Used Equipment | SOLD
Schechtl MAB 3100 14ga. Brake and Schechtl SMT 310 B/V 10'16ga. Shear. Both in excellent condition, low hours. Priced to sell: Brake $24,000 Shear $14,000 Buy both and I'll throw in a rotary phase converter. 719-331-5027
|
|
|
|
Englert MetalMan Multi-Panel Roofing Machine and 10 Ton Trailer |
33,000
|
Used Equipment | SOLD
MetalMan Multi-Panel Roofing Machine and Commercial Tandem 10 Ton Trailer.
1" Integral Snap-Lock Profile -
Englert Series A1101
The A1101 series metal roofing panel system combines the clean lines of a low profile architectural system with the unique versatility of clipless hidden fastener de
|
|
|
Englert A-13 Roll Former Machine |
16000.00
|
Used Equipment | SOLD
1. Makes 16" standing Seam metal Panels
2. Mechanically seamed for low pitch roofs 2/12 and up
3. Uses 20" coils - 22 thru 28 guage.
included is an elec mechanical seamer for straight or curved panels.
Call Mike 760-578-1631 for more info
|
|
|
|
Start-up Kit for Metal Roofing Company |
$325,000.00
|
Used Equipment | SOLD
(MRS) Complete Rollformer for Ag/R-Panel 29 & 26 gauge w/ 4 Station Decoiler(10k pound coils) multi batch control system, (Thalmann) 10' Folder with Touchscreen,(Schechtl)10' 16ga Shear, (Marion Manufacturing)12k pound Single Station Decoiler,(MRS) R-Panel Ridge Cap Press,(MRS) Coil Upender, (Schleb
|
|
|
|
USED AG PANEL ROLLFORMER FOR SALE |
INQUIRE
|
Used Equipment | SOLD
MASTER METAL ROLLFORMER FOR SALE, GOOD CONDITION NEW IN 2008
|
|
|
Sweanson Shear Snap Table 8000 |
15,000
|
Used Equipment | SOLD
Snap Table 8000 with shuttle system can be intergrated with rollformer or used seperatetly. Will notch pannels, slit pannels , and fold pannel edges(gutter edge/ valley edge) at any roof slope/pitch. eliminate scrap on valley/hips. notch,slit,fold valley in less than 30 sec. per pannel! includes kni
|
|
|
Used Equipment | SOLD
Gently used(55hrs)2010 SSQ includes 1- 1/2" mechanical standing seam profile, 1-1/2 snap clip/snap lock standing seam profile, clip relief roller,3 stiffner profiles(bead roller,pencil-rib roller, and striation rollers all mounted on their own frame assemblies),batch control computer,hot-melt interf
|
|
|
FOR SALE: Like Brand New SR-48 Tennsmith Heavy Manual Slip Roll |
$1400.00
|
Used Equipment | SOLD
Like Brand New Condition 48" Tennsmith Heavy Manual Slip Roll 16 Gauge Mild Steel Capcity w/welded stand
|
|
|
FOR SALE: Like New Condition T52 Tennsmith Foot Shear |
2250.00
|
Used Equipment | SOLD
T52-Tennsmith 52" Foot Shear, Like Brand New Condition, 16G Mild Steel Capacity, includes front and rear gauges; We can deliver from Central PA locally for free or up to 300 miles for 1.5/mile or have it loaded on trailer; buyer unloads
Contact: 814-441-5286
E-mail: elbualy@comcast.net
|
|
|
|
ENGEL MODEL 835 8-STATION ROLL FORMER |
$400.00
|
Used Equipment | SOLD
ENGEL MODEL 835 8-STATION ROLL FORMER,Some Tooling Missing, No Motor. leon@abmartin.net 717 445-6885
|
|
|
Used Equipment | SOLD
Used Tensol 19.9' x 18ga. long folder model 6-1.25-LE-Hy-R w/ slitting attachment
Contact David @ 612-483-1745
|
|
|
Used Equipment | SOLD
Tennsmith LM1214 12' x 14ga. power shear w/ 2x manual backgauge, front return, sheet supports front and rear, squaring arm.
Please contact David @ 612-483-1745
|
|
|
2006 Schlebach Quadro |
$25,000
|
Used Equipment | SOLD
2006 Schlebach Roll Former On Trailer with 2 expandable mandrel style uncoilers. The machine is in good condition. The slight surface rust you see can easily be removed with steel wool. The rust doesn't affect the quality of the panel. It has a computer and makes 4 panel styles with an easy flip
|
|
|
Used Equipment | SOLD
ESE K9 double lock roofing seamer for Fabral Stand-N-Seam roofing.
Can be easily converted to run 1 1/2" conventional standing seam roofing.
(251) 510-0224
|
|
|
For Sale; Older A/B Deck Roll Former |
$30,000.00
|
Used Equipment | SOLD
Older A/B Deck Roll Former. 3" Dia. Shafts x 54", 15 stands 20" spacing, No Motor, Shears or Decoiler. Partly unassembled, needs work, some improvements made but never finished. Has heavy 6' x 28' base. Make unknown. Leon 717 445-6885 Leon@abmartin.net
|
|
|
|
Lockformer 20 ga with auto flanger |
Inquire
|
Used Equipment | SOLD
20 ga Lockformer pittsburg machine with top mount auto flanger.
Serial # 210474. Complete with manual. Used for downspouts and radius trim.
Pictures available upon request.
Call: Mike 704-576-0442
|
|
|
|
2006 Schechtyl MAB3100 10' x 14 ga. folder |
35,000 OBO
|
Used Equipment | SOLD
2006 Schectyl MAB 3100 Serial #130706. New inverter and rewired motor.
Well maintained machine with hundreds of roof trim profiles preloaded.
Comes with all manuals, foot pedal and voltage transformers and disconnect.
PRICE: $35,000 OBO
Call: Mike 704-576-0442
|
|
|
|
ZIMMERMAN STANDING SEAM ROLL FORMER |
25,000 OBO
|
Used Equipment | SOLD
ZIMMERMAN STANDING SEAM ROLL FORMER
I have a slightly used ZIMMERMAN electric standing seam metal roofing roll former that was purchased new 3 years ago that was used to roll 4 house roofs. It is currently equipped with the roller set for the snap-lock panel, 50' run out stands, de-coiler, custom
|
|
|
|
Used Equipment | SOLD
Roll former corp 5v crimp enclosed trailer
PRICE: Make Offer
Call: Tom 757-635-1250
|
|
|
|
Used Equipment | SOLD
All Most New Rollformer 5-V Machine
High Speed
Call: Jay 772-215-2156
|
|
|
|
Quadro Schlebach |
60,000 OBO
|
Used Equipment | SOLD
Machine is a few years old and in perfect shape. Sits on a trailer.
Located in Tennessee.
PRICE: $60,000 OBO
Call: Kyle 239-671-5838
|
|
|
|
Ras Turbobend CNC Sheet Metal Folding Machine |
25,000 OBO
|
Used Equipment | SOLD
I have a used 2001 ras turbobend cnc folding system that has only 2,900 hours on it. It's barely been used. It's in great shape. I own 2 of these and this one never gets used. I don't have enough work for both which is my only reason for selling it.
EQUIPPED WITH: RAS CNC SYSTEM 5000 for Backgau
|
|
|
DAHLSTROM ROLL FORMERS |
69,500
|
Used Equipment | SOLD
MODEL 475-1808
TOOLED FOR AG/ RIB PANEL
Gear Drive
18 Stands - 3.25" Shaft Diameter
40 HP
20,000 Lb. Uncoiler - Flying Cut-Off
PRICE: $69,500
Call: 951-237-1063
|
|
|
Jobsite Tech Roof Panel Machine |
14,000 OBO
|
Used Equipment | SOLD
Model# RP1216 Serial# RP-15-0390014
Roof panel machine includes seam machine and runout rollers 3 sections
PRICE: $14,000 OBO
Call: Phillip 334-799-6061
|
|
|
|
5V-Crimp Rollformer |
23,500 OBO
|
Used Equipment | SOLD
Trailer mounted with dual decoilers. Set up is approximately 3 years old. Approximately 60 coils run thru it. Been towed once down the road since new. Digital batch controller and other accessories. I`m retiring. Located in South Florida.
PRICE: $23,500 OBO
|
|
|
2008 Englert Model A1000 Multi panel Metal roof machine |
30,000
|
Used Equipment | SOLD
Aston, PA
PRICE: $30,000 FOB
|
|
|
USED 2007 HAYES ROLLFORMER |
Make Offer
|
Used Equipment | SOLD
New in 2007. Hayes single level post cut rollformer. Set up for R panel. Includes the extended roller line.
This is recent repossession. Currently having the equipment inspected by Hayes, but appears to be in excellent condition.
PRICE: PLEASE MAKE OFFER
|
|
|
CUSTOM ROLLFORM PANEL LINE |
44,500
|
Used Equipment | SOLD
12 Stands - 3" Shaft Diameter
32" Roll Space
Chain Drive
Air Shear- Pre Cut
LITTELL 10,000 Lb. Uncoiler
Tooled For - 5V - 4V - 4V Corrugated
Corrugated & Duo-Rib
PRICE: $44,500
In Plant, Under Power
Call: 951-237-1063
|
|
|
BRADBURY - STIRILITCH R-PANEL ROLL FORM LINE |
90,000
|
Used Equipment | SOLD
20 Stands
20,000 Lb Uncoiler & coil Car
Post Cut-Off
MP300 Controller
Tooled For: 36" Wide PBR-Panel
Run-Out Table
PRICE: $90,000
In Plant, Under Power
Call: 951-237-1063
|
|
|
Hayes Dual Level Panel Rollformer Brand New in 2005 |
225,000
|
Used Equipment | SOLD
For Manufacturing Metal Roof and Sidewall Panels
$225,000
Hayes Dual Level Panel Rollformer
Material: Galvanized and Painted Steel
Material Strength: Grade "D" and "E"; 50 KSI and 80 KSI Yield Minimum
Thickness: 24 - 29 gauge for R-Panel; 26 - 29 gauge for Ag Panel
Decoiler Information
Entr
|
|
|
1999 Schechtl Mab 3100 |
Inquire
|
Used Equipment | SOLD
10' 14 ga.
Very good condition
706-945-1294
|
|
|
Tennsmith hand brake |
Inquire
|
Used Equipment | SOLD
Tennsmith hand brake Model hb121-16 ga. 10\' 16 ga. Good condition.
Great starter brake for metal roofing. 843-833-3133
|
|
|
Used 2006 New Tech Machinery Multi Pro SSP |
28,000
|
Used Equipment | SOLD
Comes with 2 run out stands, 1 mandrel, computer for batch control, and 1" nailstrip panel profile. Only 26 hours. Looks new. Price $28,000
Call 843-833-3133 for more details.
STANDARD FEATURES
New and Improved Polyurethane Drive Rollers
Choice of one hardened Stainless Steel Forming Roller
|
|
|
|
Used Equipment | SOLD
Roll former with batch control, seamer, can send photo
Excellent condition
$23,000 with seamer
Call: 850-672-0554
|
|
|
NewTech SSP Panel Machine |
34,000
|
Used Equipment | SOLD
The SSP is less than 2 years old and has never been used out in the weather. It has less than 30 hours use overall. The panel machine has a computer, an overhead reel rack, 2 - expandable decoiler reels, all mounted on 12000# tandam axel trailer. There are also 2 of the small v rib assemblys & 2 - 1
|
|
|
